1 bidirectional connection
n type
- Connection
- 1 bidirectional port
- Connector
- n type
- Signal
- antenna
RF Antenna
The CP Beam is a high-gain helical that folds flat like a camp chair — 9 dBd of directional punch that collapses into a rack drawer at load-out. Circular polarization is the trick for IEM transmit: whatever angle a performer's beltpack antenna ends up at, a circularly polarized wave still couples into it, which is why a combiner-fed CP Beam is the standard upgrade over a stubby whip on hostile RF days. Passive and reciprocal, it serves equally as a long-throw receive antenna for wireless mics.
Manufacturer product photography showing the hardware, controls, and physical form.
01 · What it does—and what that changes in your rig.
Start with the payoff, then work through how it functions, where it fits, and the details that change a real build.
The CP Beam is a high-gainHow much the preamp amplifies the incoming signal. Too low and you’re hunting through hiss; too high and peaks clip. helicalA directional antenna (paddle, LPDA, helical) aimed at the stage — focuses coverage where the performers are and rejects RF from elsewhere. that folds flat like a camp chair — 9 dBd of directional punch that collapses into a rack drawer at load-out. Circular polarization is the trick for IEMIn-Ear Monitor — earpieces that replace floor wedges, feeding each player their own mix. The reason this whole rack exists. transmit: whatever angle a performer's beltpack antenna ends up at, a circularly polarized wave still couples into it, which is why a combinerThe transmit-side twin of a distro: merges several IEM transmitters into one antenna without letting them intermodulate.-fed CP Beam is the standard upgrade over a stubby whipThe stock quarter-wave stick antenna that screws straight onto a receiver — fine for a channel or two in a small room. on hostile RFRadio Frequency — the wireless part of wireless. RF planning is why big rigs scan, coordinate, and combine antennas instead of hoping. days. Passive and reciprocal, it serves equally as a long-throw receive antenna for wireless mics.
02 · Know the whole path before you buy.
Learn the route as a block diagram: source, product function, transport, and destination. Select any block to see what enters, what changes, and what leaves.
Each block answers the same three questions: what arrives, what changes here, and what leaves.
n type
03 · What this product asks of the rest of the system.
Treat connector names as the start of the check—not the answer. These are the boundaries that determine a complete working path.
Use it as rf antenna tracked outside rack rails; follow the manufacturer’s mounting and form-factor guidance.
Complete the path with upstream and downstream gear that matches connector, direction, signal type, protocol, and wiring standard.
Documented connectors: n type. Match connector, direction, and signal type—not shape alone.
04 · Every connector, grouped by job.
Switch the product view and the documented port inventory updates with it—hardware and data stay side by side.
Switch panels to keep the hardware view and the documented port list in sync.
| Port | Panel | Connector | Direction | Signal | Channels |
|---|---|---|---|---|---|
| RF (N female, BNC adapter incl.) | rear | n type | bidirectional | antenna | — |
Showing 1 of 1 documented physical ports.
05 · Compare the decision, not just the price.
The rows are organized around fit, power, I/O, and system role so a cheaper unit cannot hide a more expensive workflow.
| Compare | ![]() | ![]() | External unit | ![]() |
|---|---|---|---|---|
| Fit | 📐 Outside rack | 📐 Outside rack | 📐 Outside rack | 📐 Outside rack |
| Power | ⚡ 0W | ⚡ 0W | ⚡ 0W | ⚡ 0W |
| Weight | ⚖️ 2.4 lb | ⚖️ 0.3 lb | ⚖️ 0.8 lb | ⚖️ 0.7 lb |
| I/O | 🔌 1 | 🔌 1 | 🔌 1 | 🔌 1 |
| Estimate | 💵 ~$899 | 💵 ~$219 | 💵 ~$280 | 💵 ~$399 |
| Deep dive | Current selection | Full comparison → | Full comparison → | Full comparison → |
06 · Resolve the questions that can change the purchase or build plan.
Short, source-backed answers surface rack fit, power, cabling, and connection details before they become surprises.
The catalog assigns it no rack units. Builder tracks it as non-rack gear; follow the manufacturer’s mounting, case, and form-factor guidance.
It is verified passive and requires no AC power.
1 documented physical ports, including RF (N female, BNC adapter incl.).
07 · See this gear inside a complete system plan.
08 · Related gear, in the order you may need it.