1 bidirectional connection
bnc
- Connection
- 1 bidirectional port
- Connector
- bnc
- Signal
- antenna
~$280
Catalog estimate
No verified retailer history yet. The catalog estimate is a planning reference; retailer prices and availability may differ.
~$280
Catalog estimate
No verified retailer history yet. The catalog estimate is a planning reference; retailer prices and availability may differ.
The A 2003-UHFThe TV-band radio range (roughly 470–608 MHz in the US) where serious wireless mics and IEMs live — better behaved than crowded 2.4 GHz. was the standard Sennheiser paddleA directional antenna (paddle, LPDA, helical) aimed at the stage — focuses coverage where the performers are and rejects RF from elsewhere. for two decades — the flat directional antenna hanging over half the world's monitor rigs, pointed at the stage for receive or fed from a combinerThe transmit-side twin of a distro: merges several IEM transmitters into one antenna without letting them intermodulate. for IEMIn-Ear Monitor — earpieces that replace floor wedges, feeding each player their own mix. The reason this whole rack exists. transmit. Passive, wideband across the full legacy 450–960 MHz UHF span, and reciprocal, it did both jobs with the same hardware. Sennheiser has discontinued it in favor of the ADP UHF, but so many are in circulation that used racks and installed rigs will carry them for years yet.
Learn the route as a block diagram: source, product function, transport, and destination. Select any block to see what enters, what changes, and what leaves.
Each block answers the same three questions: what arrives, what changes here, and what leaves.
bnc
Switch the product view and the documented port inventory updates with it—hardware and data stay side by side.
Switch panels to keep the hardware view and the documented port list in sync.
| Port | Panel | Connector | Direction | Signal | Channels |
|---|---|---|---|---|---|
| Antenna (BNC) | rear | bnc | bidirectional | antenna | — |
Showing 1 of 1 documented physical ports.
| Compare | External unit | ![]() | ![]() | ![]() |
|---|---|---|---|---|
| Fit | 📐 Outside rack | 📐 Outside rack | 📐 Outside rack | 📐 Outside rack |
| Power | ⚡ 0W | ⚡ 0W | ⚡ 0W | ⚡ Bus |
| Weight | ⚖️ 0.8 lb | ⚖️ 0.3 lb | ⚖️ 0.7 lb | ⚖️ 1.4 lb |
| I/O | 🔌 1 | 🔌 1 | 🔌 1 | 🔌 1 |
| Estimate | 💵 ~$280 | 💵 ~$219 | 💵 ~$399 | 💵 ~$1,099 |
| Deep dive | Current selection | Full comparison → | Full comparison → | Full comparison → |
Short, source-backed answers surface rack fit, power, cabling, and connection details before they become surprises.
The catalog assigns it no rack units. Builder tracks it as non-rack gear; follow the manufacturer’s mounting, case, and form-factor guidance.
It is verified passive and requires no AC power.
1 documented physical ports, including Antenna (BNC).
Discontinued - sennheiser.com US: "This product is no longer available to be purchased"; US dealer stock exhausted (Markertek / Chuck Levin listings sold out). Kept in catalog EOL-flagged: plenty are in circulation on installed and used rigs.