Shure PA805SWB Directional Antenna
Shure·Model PA805SWB·shure-pa805swb
Photos
Manufacturer product photography — the drawn faceplate above stays true to panel layout; these show the hardware itself.
About the Shure PA805SWB
The PA805SWB is the transmit half of a serious PSM rig: hang it downstage of the band, feed it from a PA821 combinerThe transmit-side twin of a distro: merges several IEM transmitters into one antenna without letting them intermodulate., and every beltpack on deck gets a focused 100-degree lobe of IEMIn-Ear Monitor — earpieces that replace floor wedges, feeding each player their own mix. The reason this whole rack exists. signal instead of whatever leaks off a rack whipThe stock quarter-wave stick antenna that screws straight onto a receiver — fine for a channel or two in a small room.. Because it is passive and reciprocal it doubles as a directional receive paddleA directional antenna (paddle, LPDA, helical) aimed at the stage — focuses coverage where the performers are and rejects RF from elsewhere. for wireless mics, and the swivel stand adapter aims it without extra hardware. Wideband 470–952 MHz coverage keeps it useful across band changes.
Passive directional paddleA directional antenna (paddle, LPDA, helical) aimed at the stage — focuses coverage where the performers are and rejects RF from elsewhere., 470–952 MHz, 6.5 dBi typical, 100° beamwidth, BNCThe twist-lock coax connector used for word clock and antenna runs — it locks, so it can’t be pulled out mid-show. female. The PSM transmit paddle (PA821 combinerThe transmit-side twin of a distro: merges several IEM transmitters into one antenna without letting them intermodulate. → stage), equally usable for receive.
I/O Ports (1)
| Port | Connector | Direction | Signal | Channels |
|---|---|---|---|---|
| Antenna (BNC) | BNC | bidirectional | antenna | — |
Related gear
