2 documented inputs
XLR female + usb c
- Arrives as
- 2 documented inputs
- Connector
- XLR female + usb c
- Signal
- analog audio
Wireless Mic
Bose XLR Wireless Mic/Line Transmitter for S1 Pro+. Plan its source-defined physical connections and placement in your rig.
01 · What it does—and what that changes in your rig.
Start with the payoff, then work through how it functions, where it fits, and the details that change a real build.
Bose XLRThe standard 3-pin locking connector for mics and balanced line signals — pin 1 is the shield, pins 2 and 3 carry the balanced pair. Wireless Mic/Line Transmitter for S1 Pro+. Plan its source-defined physical connections and placement in your rig.
02 · Know the whole path before you buy.
Learn the route as a block diagram: source, product function, transport, and destination. Select any block to see what enters, what changes, and what leaves.
Each block answers the same three questions: what arrives, what changes here, and what leaves.
XLR female + usb c
03 · What this product asks of the rest of the system.
Treat connector names as the start of the check—not the answer. These are the boundaries that determine a complete working path.
Use it as wireless mic tracked outside rack rails; follow the manufacturer’s mounting and form-factor guidance.
Complete the path with upstream and downstream gear that matches connector, direction, signal type, protocol, and wiring standard.
Documented connectors: XLR female, usb c. Match connector, direction, and signal type—not shape alone.
04 · Every connector, grouped by job.
Switch the product view and the documented port inventory updates with it—hardware and data stay side by side.
Switch panels to keep the hardware view and the documented port list in sync.
| Port | Panel | Connector | Direction | Signal | Channels |
|---|---|---|---|---|---|
| MIC / LINE INPUT | top | XLR female | input | analog audio | — |
| USB-C · CHARGING INPUT | top | usb c | input | power | — |
Showing 2 of 2 documented physical ports.
05 · Compare the decision, not just the price.
The rows are organized around fit, power, I/O, and system role so a cheaper unit cannot hide a more expensive workflow.
| Compare | External unit | ![]() | ![]() | ![]() |
|---|---|---|---|---|
| Fit | 📐 Outside rack | 📐 1U · half-rack | 📐 1U · half-rack | 📐 1U · half-rack |
| Power | ⚡ Unverified | ⚡ Unverified | ⚡ Unverified | ⚡ 6W |
| Weight | ⚖️ Unlisted | ⚖️ 1.5 lb | ⚖️ 2.4 lb | ⚖️ 2.2 lb |
| I/O | 🔌 2 | 🔌 5 | 🔌 7 | 🔌 7 |
| Estimate | 💵 ~$149 | 💵 ~$379 | 💵 ~$999 | 💵 ~$749 |
| Deep dive | Current selection | Full comparison → | Full comparison → | Full comparison → |
06 · Resolve the questions that can change the purchase or build plan.
Short, source-backed answers surface rack fit, power, cabling, and connection details before they become surprises.
The catalog assigns it no rack units. Builder tracks it as non-rack gear; follow the manufacturer’s mounting, case, and form-factor guidance.
Its power requirement is not yet verified in the catalog.
2 documented physical ports, including MIC / LINE INPUT, USB-C · CHARGING INPUT.
07 · See this gear inside a complete system plan.
08 · Related gear, in the order you may need it.
Planning guides for wireless mic systems.
Fundamentals · 8 min
Why sealed IEMs make you feel disconnected from the room — and exactly how to put the audience back into your mix with one or two well-placed mics.
Wireless · 10 min
Why your wireless mics and IEMs need a frequency plan, what intermodulation means in practice, and how to coordinate channels for a clean show.
Wireless · 11 min
When you need a combiner vs a distro, active vs passive, cable choice and length math, and how to scale a 4-pack rig into an 8 or 12-pack without intermod nightmares.