3 documented inputs
XLR female + IEC C14
- Arrives as
- 3 documented inputs
- Connector
- XLR female + IEC C14
- Signal
- analog audio
System Processor
dbx 223xs Stereo 2-Way, Mono 3-Way Crossover. Plan its source-defined physical connections and placement in your rig.
01 · What it does—and what that changes in your rig.
Start with the payoff, then work through how it functions, where it fits, and the details that change a real build.
dbx 223xs Stereo 2-Way, Mono 3-Way CrossoverSplits audio into frequency bands so each speaker only gets what it can handle — lows to the subs, highs to the horns.. Plan its source-defined physical connections and placement in your rig.
02 · Know the whole path before you buy.
Learn the route as a block diagram: source, product function, transport, and destination. Select any block to see what enters, what changes, and what leaves.
Each block answers the same three questions: what arrives, what changes here, and what leaves.
XLR female + IEC C14
03 · What this product asks of the rest of the system.
Treat connector names as the start of the check—not the answer. These are the boundaries that determine a complete working path.
Use it when 1U and 175.26 mm of depth fit the case.
Complete the path with upstream and downstream gear that matches connector, direction, signal type, protocol, and wiring standard.
Documented connectors: XLR male, XLR female, IEC C14. Match connector, direction, and signal type—not shape alone.
04 · Every connector, grouped by job.
Switch the product view and the documented port inventory updates with it—hardware and data stay side by side.
Switch panels to keep the hardware view and the documented port list in sync.
| Port | Panel | Connector | Direction | Signal | Channels |
|---|---|---|---|---|---|
| CHANNEL 2 HIGH OUTPUT | rear | XLR male | output | analog audio | — |
| CHANNEL 2 LOW / MID OUTPUT | rear | XLR male | output | analog audio | — |
| CHANNEL 1 HIGH / NOT USED OUTPUT | rear | XLR male | output | analog audio | — |
| CHANNEL 1 LOW-LF SUM / LOW-MID OUTPUT | rear | XLR male | output | analog audio | — |
| CHANNEL 2 INPUT / NOT USED IN MONO | rear | XLR female | input | analog audio | — |
| CHANNEL 1 INPUT | rear | XLR female | input | analog audio | — |
| IEC MAINS INPUT | rear | IEC C14 | input | power | — |
Showing 7 of 7 documented physical ports.
05 · Compare the decision, not just the price.
The rows are organized around fit, power, I/O, and system role so a cheaper unit cannot hide a more expensive workflow.
| Compare | ![]() | |||
|---|---|---|---|---|
| Fit | 📐 1U | 📐 1U | 📐 1U | 📐 1U |
| Power | ⚡ 15W | ⚡ 15W | ⚡ 15W | ⚡ 22W |
| Weight | ⚖️ 3.7 lb | ⚖️ 4.9 lb | ⚖️ 4.0 lb | ⚖️ 5.3 lb |
| I/O | 🔌 7 | 🔌 10 | 🔌 9 | 🔌 12 |
| Estimate | 💵 ~$300 | 💵 ~$134.79 | 💵 ~$380 | 💵 ~$599 |
| Deep dive | Current selection | Full comparison → | Full comparison → | Full comparison → |
06 · Resolve the questions that can change the purchase or build plan.
Short, source-backed answers surface rack fit, power, cabling, and connection details before they become surprises.
It occupies 1U. Its documented depth is 175.26 mm.
Typical draw is 15W and documented maximum draw is 0W.
7 documented physical ports, including CHANNEL 2 HIGH OUTPUT, CHANNEL 2 LOW / MID OUTPUT, CHANNEL 1 HIGH / NOT USED OUTPUT, CHANNEL 1 LOW-LF SUM / LOW-MID OUTPUT, CHANNEL 2 INPUT / NOT USED IN MONO, CHANNEL 1 INPUT.
07 · See this unit inside a real rack plan.
08 · Related gear, in the order you may need it.