Furman P-8 PRO C Power Conditioner

The Furman P-8 PRO C is a 1U power conditioner built around a 20-amp rating, which is the detail that separates it from the more common 15-amp units in the same rack-mount form factor. Its job is straightforward: clean incoming AC, protect downstream gear from surges and spikes via Furman's SMP+ multi-stage filtering, and distribute that power cleanly across eight rear-mounted outlets. In a monitor rig or IEM rack loaded with transmitters, a UPS, and a handful of other draws, this is the foundation everything else sits on.

The 20-amp rating is the practical headline here. A dense IEM rack — say, four or more dual-channel transmitter packs, a personal monitor mixer, a router, and a UPS — can quietly push past what a 15-amp conditioner can safely handle, especially at power-on inrush. The P-8 PRO C gives you the headroom to stop worrying about that math. The eight rear outlets are enough for a legitimately full rack without daisy-chaining strips. At 235mm deep and 3.6kg, it sits comfortably in a shallow tour rack without dominating the depth budget.

If your rig genuinely pulls heavy current — multiple IEM transmitters, an amplifier, or a UPS unit in the same rack — this is the right tool. If you're running a minimal four-piece setup with light current draw, a standard 15-amp unit will serve you fine and cost less. Be clear about what the P-8 PRO C is not: it is not a voltage regulator and not a UPS. A sustained brownout will still affect your gear. It protects against surges and filters noise; stable voltage and battery backup require separate solutions.